LUMA 75 Pocket Portable Projector Support – KODAK Photo Plus

LUMA 75 Pocket Portable Projector Support

1. Charge the Projector

Connect the adapter to the micro USB port of the projector, using the included power cord.
Plug the adapter into an outlet or other power source.
You may now use the projector .
While plugged in, the projector's battery will automatically charge.

It is recommended that you allow the projector to charge for at least 4 hours before using it in battery mode for the first time.

2. Turn on the Projector

Press and hold the power button for 5 seconds to turn on the projector.

3. Adjust Screen Size

The screen size will increase or decrease as the projector is brought closer or further from the wall.

4. Adjust the Focus Wheel

Open a still image and carefully rotate the focus wheel until the image is clear.

5. Connect to an External Device

Your projector can be connected to a variety of external devices using the included HDMI® cable. Compatible devices include laptops, smartphones, tablets, gaming devices, and more.

Connect one end of the HDMI® cable to the projector.
Connect the other end of the HDMI® cable to the external device.

NOTE: Some devices may require an adapter in order to connect to the projector. Check the table in the online user manual if using a device that is not HDMI® compatible.

6. Insert MicroSD™ Card or USB Drive

Slide the microSD™ card into the microSD™ card slot until it clicks into place. If using a USB drive, insert it into the USB input.

Using Your Projector

1. Turn on the Projector

Press and hold the power button to turn on the projector.

2. Playing a Video File

After turning on the projector, you will be prompted to select either Movies or Images.
Tap the Confirm button to gain access to the control panel, then use the confirm button to select Movie.
You will then be prompted to select either USB or MicroSD™. Use the buttons to highlight the format you wish to access. Then tap the confirm button to select.
Use the buttons to cycle through the list of files. Select the file you wish to play with the confirm button.

3. Video Controls

Before you can use the control panel, you must always tap the confirm button to make it appear first.

Pause: Tap the confirm button.
Fast Forward: Tap the button. Each tap will increase the speed by x2, x4, x8, and x16.
Rewind: Tap the button. Each tap will increase the speed by x2, x4, x8, and x16.
Exit: Tap the button to return to the video file list. Tap this button again to return to the main menu.
Volume Control: Tap the button. Then use the plus and minus buttons to increase or decrease the volume.

4. Playing a Photo File

After turning on the projector, you will be prompted to select either Movies or Images.
Tap the confirm button to gain access to the control panel.
Use the forward button to highlight the Images option. Then use the confirm button to select Images.
You will then be prompted to select either USB or MicroSD™. Use the navigation buttons to highlight the format you wish to access. Then tap the confirm button to select.
Use the left and right buttons to cycle through the list of files. Select the file you wish to play with the confirm button.

5. Photo Controls

When playing a photo file, the projector will automatically play in order.

Pause Slideshow: Tap the confirm button.
Resume Slideshow: Tap the confirm button.
Play Next Image: Tap the confirm button.
Play Previous Image: Tap the confirm button.

Firmware Update

1. Download this zip file. 2. Unzip and copy the file MERGE.bin to a USB drive (note: USB drive must be empty and formatted FAT32). 3. Before powering on projector, insert USB drive. 4. Power on projector. Make sure not to remove the USB as the projector is booting. 5. Projector should now boot up with most current firmware.

WATCH - HOW TO USE VIDEO

WATCH - HOW TO USE VIDEO

USER MANUALS

WARRANTY

LUMA 75 PROJECTOR - CONSUMER WARRANTY

Customer Service

U.S.: kodak@camarketing.com, 844-516-1539

International: kodakintl@camarketing.com, 844-516-1540

The KODAK trademark, logo and trade dress are used under license from KODAK. PRINTOMATIC is a trademark of C&A IP Holdings, LLC in the U.S., the European Union and the United Kingdom. ZINK, Zero Ink, and the ZINK logo are trademarks of ZINK Holdings, LLC, registered in the U.S. and other countries. microSD is a trademark of SD-3C LLC in the U.S. and/or other countries. All other products, brand names, company names and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement or approval.

Legal Disclaimer: Actual product packaging and materials may contain more and different information than what is shown on our website. We recommend that you do not rely solely on the information presented and that you always read labels, warnings, and directions before using a product.

Distributed by: C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 USA

C&A Marketing UK LTD, 167 Hermitage Road, Crusader Industrial Estate, London N4 1LZ, UK

shop.app